IO Modules / Controls & Indicators - Huge Savings! Save up to 16%


Huge Savings! Up to 16% off on IO Modules (in Controls & Indicators) at Band Electric [52]. Top brands include Automation Systems Interconnect, Siemens, Opto 22, ICP DAS, SIEMENS, Brentek, Fuji, GF Signet, & Softlink. Hurry! Limited time offers. Offers valid only while supplies last.



ASI ASI451130 Two Channel Loop Powered Analog Signal Isolator Transmitter, DIN Rail Mount, 4-20 mA Input, 4-20 mA Output
By Automation Systems Interconnect
In Stock
$139.08

mpn: ASI451130, ean: 0813101026295,

4.7 out of 5 stars with 44 reviews
The ASI451130 is a DIN rail mounted loop powered analog signal isolator transmitter for two independent standard 4-20mA control circuits to save space and reduce costs. The unit provides electrical isolation between the input and output circuits for each channel and does not require any auxiliary power. The unit is factory calibrated to allow for quick and easy installation and the galvanic isolation eliminates problems associated with ground loops, transient and unwanted noise interference. The


Siemens 6ED1052-1MD08-0BA0 LOGO! 12/24RCE, logic module, disp PS/I/O: 12/24VDC/relay, 8 DI (4AI)/4DO, memory 400 blocks, modular expandable, Ethernet
By Siemens
In Stock
$166.00
$145.00
You Save: 13%

mpn: 6ED1052-1MD08-0BA0, ean: 4034106031046,

4.8 out of 5 stars with 37 reviews
LOGO! 12/24RCE, logic module, disp PS/I/O: 12/24VDC/relay, 8 DI (4AI)/4DO, memory 400 blocks, modular expandable, Ethernet, integr. web server, data log, user-defined Web pages, standard microSD card for LOGO! Soft Comfort V8 or higher, older projects executableSiemens 6ED1052-1MD08-0BA0 (new model replace for previous model 6ED1052-1MD00-0BA8).


Opto 22 SNAP-AITM-i - SNAP Isolated Analog Input Module, 2-Channel Thermocouple or mV Input
By Opto 22
In Stock
$265.00

mpn: SNAP-AITM-i, ean: 0013227037179,

4.0 out of 5 stars with 29 reviews
The SNAP-AITM-i module provides two channels of analog to digital conversion. Each channel on the module can be configured for -150 mV DC to +150 mV DC or -75 mV DC to +75 mV DC, or for type E, J, or K thermocouple operation. The two channels are isolated from each other. Since these channels do not share any common connections, grounded sensors and field devices may be used with them. SNAP analog input modules are part of Opto 22’s SNAP PAC System. These modules mount on a SNAP PAC rack with


ICP DAS I-7514U Isolated 4 Channels RS-485 Active Hub
By ICP DAS
In Stock
$229.00

mpn: I-7514U,

4.3 out of 5 stars with 22 reviews
Isolated 4 Channels RS-485 Active Hub. Supports operating temperatures between -25 to 75C (-13F ~ 167F). The I-7514U is a 4-ch RS-485 active star wiring hub, it has 4 independent RS-485 output channels and one RS-485 input channel. Each output channel is equipped with an individual driver. The data from a master to the input channel will simultaneously be forwarded to all the four output channels. The I-7514U provides 2 modes of baud rate setting, one is Self-Tuner mode and the other is fixed ba


ASI ASI451124 Single Channel Dual Output Analog Signal Isolator Transmitter Splitter, 3-Way Isolation, DIN Rail Mount, Single 4-20 mA Input, Dual 4-20 mA Output
By Automation Systems Interconnect
In Stock
$139.99

mpn: ASI451124, ean: 0813101026271,

4.7 out of 5 stars with 23 reviews
The ASI451124 is a DIN rail mounted analog signal isolator transmitter splitter with a single circuit input of 4-20mA and a dual 4-20mA output that provides electrical isolation between the input, output and power circuits. The analog signal splitter isolator can be mounted directly in the control panel or remotely near the field devices due to the high level of isolation. The unit is factory calibrated to allow for quick and easy installation and the galvanic isolation eliminates problems assoc


Opto 22 G4PB8H G4 8 Channel Rack with Header Connector
By Opto 22
In Stock
$75.00

mpn: G4PB8H,

4.1 out of 5 stars with 42 reviews
The G4PB8H I/O mounting rack accommodates up to eight G4 I/O modules. A header connector accepts a standard 50-pin cable, the Optomux B1, Pamux B5, or B100 brain board for logic connections. Barrier strips with screw terminals provide the field and mounting rack power connections. Insert and remove modules easily and quickly without disturbing field wiring. Modules are secured to the mounting rack with a threaded captive hold-down screw. The logic supply is fused with a 1A fuse.89/336/EEC, IEC 9


ICP DAS USA PET-7053 16-channel Isolated Digital Input (32-bit Counter) PoE Module, communicable over Modbus TCP and Ethernet
By ICP DAS
In Stock
$279.00

mpn: PET-7053,

4.6 out of 5 stars with 40 reviews
16-channel Isolated Digital Input Module with 32-bit Counters PoE Module, communicable over Modbus TCP and Modbus UDP protocols. It is a web-based Ethernet I/O module that features a built-in web server which allows configuration, I/O monitoring and I/O control by simply using a regular web browser. Remote control is as easy as surfing the Internet. Besides, with the web HMI function, no more programming or HTML skills are required; creating dynamic and attractive web pages for I/O monitoring an


SIEMENS 6ES7 138-4FA04-0AB0 SIMATIC DIGITAL INPUT POWER MODULE ET200S 6ES7 138-4FA04-0AB0
By SIEMENS
In Stock
$280.00

mpn: 6ES7138-4FA04-0AB0, ean: 4025515076681,

4.7 out of 5 stars with 9 reviews
USED PULLED FROM WORKING EQUIPMENT Power Module Used Part(s), In Good Condition, Selling as Pictured24VDC. 4/8 F-DI. DIGITAL. INPUT MODULE. PLC Module/Rack.


Opto 22 AD3 Input Analog Module, 4 - 20 mA, 13 mA at +15 VDC and 7.5 mA at -15 VDC
By Opto 22
In Stock
$80.00

mpn: AD3,

4.6 out of 5 stars with 59 reviews
Each Opto 22 AD3 analog input module provides a single channel of optically-isolated current-to-digital conversion. For the AD3 modules, the nominal input range is 4 to 20 mA with an under/over range capability from less than 3 mA to greater than 35 mA. These modules plug into a Classic Standard analog I/O rack and are secured by a captive screw. Ambient temperature: 0 to 70 degree C operating, - 25 to 85 degree C storage.IEC 950: 1991-09, 89/336/EEC, Underwriters LaboratoryInput impedance: 249


ASI x756526 Slim Line Single Channel Loop Powered Analog Signal Isolator Transmitter for 0-20 or 4-20 mA Control Loops, DIN Rail Mount, 1.5 kVAC Isolation
By Automation Systems Interconnect
In Stock
$64.96

mpn: x756526, ean: 0813101026233,

4.9 out of 5 stars with 46 reviews
The ASI X756526 is a loop powered analog signal isolator for 0 to 20mA and 4 to 20 mA control loop circuits. It is only 6.2mm wide. No separate power supply is required since it can be used in circuits where the sensor is getting its power from the control loop. The unit is factory calibrated to allow for quick and easy installation and the galvanic isolation eliminates problems associated with ground loops, transient and unwanted noise interference. The ASI slim line analog signal splitter isol


Watchdog Timer P8-WDT24/PLC - Brentek - 2 sec. fixed timeout
By Brentek
In Stock
$67.00

mpn: P8-WDT24/PLC,

4.9 out of 5 stars with 32 reviews
Brentek P8-WDT24/PLCWatchdog Timers are designed to monitor control system integrity as a ''System Watchdog'' in PLC (Programmable Logic Controller), SBC (Single-board Controller) and other OEM control applications. Watchdog Timer Modules monitor the control system's activity by detecting on/off transitions of a control line. During normal operation, the watchdog's internal timer is continually reset by control line activity (toggling) and its FORM C Dry Contact output remains energized. When co


New Module 6MBI75FA-060-01 6MBI75FA060-01 FUJI Module Original
By Fuji
In Stock
$75.05

mpn: 6MBI75FA-060-01,

4.8 out of 5 stars with 34 reviews
New surplus power module.All items New surplus with 30 days money back warranty. Quality control ensures all products in good working condition or a FULL refund. Order confirmation & shipment notification with tracking information by UPS EXPRESS. Competitive pricing. Courteous, knowledgeable and professional sales personnel.


Opto 22 SNAP-AIV-i - SNAP Analog Voltage Input Module, 2 Isolated Channels, -10 VDC to +10 VDC or -5 VDC to +5 VDC Input
By Opto 22
In Stock
$265.00
$221.34
You Save: 16%

mpn: SNAP-AIV-i,

4.9 out of 5 stars with 38 reviews
The SNAP-AIV-i provides two isolated channels of analog voltage input. Each channel can be configured for -10 to +10 VDC or for -5 to +5 VDC operation. In addition to having two channels isolated from each other, the module is also transformer isolated and optically isolated from other modules and devices. SNAP analog input modules are part of Opto 22’s SNAP PAC System. These modules mount on a SNAP PAC rack with a SNAP PAC brain or R-series controller, either a standard wired model or a Wired


I-7017 Analog Input Data Acquisition Module with 8 AI Channels, communicable Over RS-485, and Free EZ Data Logger Software
By ICP DAS
In Stock
$299.00

mpn: I-7017,

4.2 out of 5 stars with 32 reviews
Analog Input Data Acquisition Module with 8 AI Channels, communicable over RS-485, and FREE EZ Data Logger Software, Supports operating temperatures between -25 to 75???C. Can be used with LabView and SCADA softwareDCON utility can help users to configure and test I-7011 modules.. provides cost-effective protection. Can be used for a wide range of valuable industrial control signals and systems. library functions and demo programs are provided. comes with FREE EZ Data Logger Software..


ICP DAS USA ICP-I-7520 Isolated RS-232 to RS-485 Serial Converter with Din Rail Mount.
By ICP DAS
In Stock
$107.96

mpn: I-7520,

4.8 out of 5 stars with 59 reviews
The I-7520 is an Isolated RS 232 to RS 485 Converter with Auto Tuning function, auto switching baud rate, and is made of fire retardant materials. Most industrial computer systems provide standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals, which transparently converts RS-232 signals into RS-485 si


GF Signet 3-9900.393 2 Dry-Contact Relay Module, 8" (Pack of2)
By GF Signet
In Stock
$142.95
$136.83
You Save: 4%

mpn: 3-9900.393,

4.5 out of 5 stars with 41 reviews
GF Signet 3-9900.393: Signet Relay Module - 2 DCR.Relay Module. (2) dry-contact relays. Plug and play modules add functionality to the 9900 Transmitters.


New SM322, Digital Output Module 300 322-1BH01 can replace Siemens 6ES7 322-1BH01-0AA0
By Softlink
In Stock
$149.00

mpn: 322-1BL00-0AA0,

4.3 out of 5 stars with 58 reviews
All our SOFTLINK 300 digital outputs convert the internal signal level to the external power level for process control etc. All modules are compatible with Siemens S7-300 and VIPA 300V series, suitable for controlling solenoid valves, contactors, and small-power devices within their permissible level. The output module provides galvanic isolation from the process level, and has LED indicators for supply voltage, error indication, status indication for each channel.Can replace Siemens S7-300 6ES7


ICP DAS USA ICP-tGW-715 Tiny Modbus TCP to Modbus RTU / ASCII PoE Gateway, with 1 RS-422/RS-485 port.
By ICP DAS
In Stock
$159.00

mpn: tGW-715,

4.8 out of 5 stars with 31 reviews
The tGW-715 is a tiny Modbus TCP to Modbus RTU/ASCII gateway that enables a Modbus TCP master to communicate with Modbus RTU/ASCII serial devices through Ethernet network, which eliminates the cable length limitation of serial devices. The tGW-715 tiny Modbus TCP to Modbus RTU/ASCII gateway can be used to create a pair-connection application, serial-bridge or serial-tunnel application. It can route data over TCP/IP between two Modbus RTU/ASCII serial devices, which is useful when connecting main


Opto 22 PB8H 8 Channel Standard Digital Mounting Rack with Header Connector
By Opto 22
In Stock
$117.98

mpn: PB8H,

4.0 out of 5 stars with 60 reviews
The PB8H I/O mounting rack can accomodate up to eight Opto 22 standard (Generation 1) digital single channel I/O modules in any combination. The PB8H is designed to interface to Optomux (B1), Pamux (B5), or Mistic (B100) protocol brain boards via a 50-pin header connector. This 50-pin header connector also allows an easy connection to computer parallel I/O ports via a 50-conductor ribbon cable. Special mounting tabs allow the PB8H to be used with the Opto 22 PBSA, PBSB, and PBSC power supplies.8


Watchdog Timer - Brentek M-WDT5 - 2 second fixed timeout, M case
By Brentek
In Stock
$66.00

mpn: M-WDT5,

4.2 out of 5 stars with 25 reviews
Brentek's M-WDT5 Watchdog Timer Module monitors a control system's activity by detecting on/off transitions of a control line. During normal system operation, the watchdog's internal timer is continually reset by control line activity and its dry-contact output remains energized. When control is lost (control line stops toggling), the timer times-out and de-energizes the output contact, indicating ''Loss of Control''. This Watchdog Timer's timeout period is factory-set to 2 seconds. Loss of Cont



Viewing Page 1 of 2

Browse Our Catalog