NF Corp. Programmable Filter 10Hz to 2kHz, DT-5FL1
NF Corp. Programmable Filter 10Hz to 2kHz, DT-5FL1 by NF at Band Electric. MPN: DT-5FL1. Hurry! Limited time offer. Offer valid only while supplies last. SpecificationsAbsolute maximum ratingsSupply voltage(±Vs) : ±16V, Input voltage: ±Vs, Control voltage : +5.5V -0.5VFilter characteristicsType : 5-pole Elliptic LPFCut-off frequency(fc)Cut-off frequency : 10, 20, 50, 100, 200, 500, 1k, 2kHz, Accuracy : ±3%Pass-band characteristicsGain : 0dB ±0.3dB(0.05fc), Ripple : 0.13dBp-p (design center value), Distortion : 0.05%(typ.)Attenuation characteristicsRolloff : 60dB/oct equivalent, Attenuation characteristics : 60dB(typ.) 1.82fc, Min. attenuatio
Product Description & Reviews
SpecificationsAbsolute maximum ratingsSupply voltage(±Vs) : ±16V, Input voltage: ±Vs, Control voltage : +5.5V -0.5VFilter characteristicsType : 5-pole Elliptic LPFCut-off frequency(fc)Cut-off frequency : 10, 20, 50, 100, 200, 500, 1k, 2kHz, Accuracy : ±3%Pass-band characteristicsGain : 0dB ±0.3dB(0.05fc), Ripple : 0.13dBp-p (design center value), Distortion : 0.05%(typ.)Attenuation characteristicsRolloff : 60dB/oct equivalent, Attenuation characteristics : 60dB(typ.) 1.82fc, Min. attenuation : 60dB(typ.) , High frequency attenuation (10fc to 1MHz): Min.55dBInput characteristicsInput impedance : Min. 50kΩ, Max. input voltage (linear) : ±10VOutput characteristicsOutput impedance : Max. 100Ω, Max. output voltage : ±10V, Voltage noise (input short) : Max. 140µVrms(typ.) input short (10Hz to 500kHz bandwidth), Offset voltage : ±10mV(typ.), adjustableOthersSupply voltage : ±15V (±14 to ±16V), Quiescent current : ±28mA(typ.), Dimensions : 54.4(W) x 33.7(D) x 9.4(H) mm, type HA package This device is compatible with Datel Product model FLJ-D5LA1Based on this product, NF will respond flexibly customers requirement
Features & Highlights
- Low pass filters with steep attenuation characteristics, which are intended for anti-aliasing at A/D conversion
- Cut-off frequency : to be shifted at 8 positions with digital signal
- Suitable for frequent shift in sampling frequency
- Cut-off frequency range : 10, 20, 50, 100, 200, 500, 1k, 2kHz
- Filter characteristics : 5-pole Elliptic LPF 60dB/oct equivalent
Additional Information
Manufacturer:
NF Corporation
Category:
Radio Frequency Filters
Item Size:
2.14 x 0.37 x 1.33 inches
Have questions about this item (DT-5FL1), or would like to inquire about a custom or bulk order?
If you have any questions about this product by NF, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: DT-408DC2,
SpecificationsFilter characteristicsType : Low pass, high pass, band pass, Order : 2(1-pole pair) x 2, Rolloff : (low pass, high pass) 12dB/oct, (band pass) 6dB/oct.BW, Characteristics : Configuation of any high-order filters available. Max. 4-pole f...
mpn: DT-5FL2,
SpecificationsAbsolute maximum ratingsSupply voltage(±Vs) : ±16V, Input voltage: ±Vs, Control voltage : +5.5V -0.5VFilter characteristicsType : 5-pole Elliptic LPFCut-off frequency(fc)Cut-off frequency : 100, 200, 500, 1k, 2k, 5k, 10k, 20kHz, Accu...
mpn: SV-4BL1,
SV series are resistor-tunable low-pass filters in 15-pin single-inline package(sip).It's powered by 5V or 3.3V of single supply voltage.An easy setting of cutoff frequency is assured with the external resistors.4 model is available. SpecificationsAb...
mpn: SV-4FL1,
SV series are resistor-tunable low-pass filters in 15-pin single-inline package(sip).It's powered by 5V or 3.3V of single supply voltage.An easy setting of cutoff frequency is assured with the external resistors.4 model is available. SpecificationsAb...