NF Corp. Programmable Filter 100Hz to 20kHz, DT-5FL2


NF Corp. Programmable Filter 100Hz to 20kHz, DT-5FL2 by NF at Band Electric. MPN: DT-5FL2. Hurry! Limited time offer. Offer valid only while supplies last. SpecificationsAbsolute maximum ratingsSupply voltage(±Vs) : ±16V, Input voltage: ±Vs, Control voltage : +5.5V -0.5VFilter characteristicsType : 5-pole Elliptic LPFCut-off frequency(fc)Cut-off frequency : 100, 200, 500, 1k, 2k, 5k, 10k, 20kHz, Accuracy : ±3%Pass-band characteristicsGain : 0dB ±0.3dB(0.05fc), Ripple : 0.13dBp-p (design center value), Distortion : 0.05%(typ.)Attenuation characteristicsRolloff : 60dB/oct equivalent, Attenuation characteristics : 60dB(typ.) 1.82fc, Min. attenuat


NF Corp. Programmable Filter 100Hz to 20kHz, DT-5FL2 by NF
4.2 out of 5 stars with 32 reviews
Condition: New
Availability: In Stock
$245.99


Quantity:  

 


Product Description & Reviews

SpecificationsAbsolute maximum ratingsSupply voltage(±Vs) : ±16V, Input voltage: ±Vs, Control voltage : +5.5V -0.5VFilter characteristicsType : 5-pole Elliptic LPFCut-off frequency(fc)Cut-off frequency : 100, 200, 500, 1k, 2k, 5k, 10k, 20kHz, Accuracy : ±3%Pass-band characteristicsGain : 0dB ±0.3dB(0.05fc), Ripple : 0.13dBp-p (design center value), Distortion : 0.05%(typ.)Attenuation characteristicsRolloff : 60dB/oct equivalent, Attenuation characteristics : 60dB(typ.) 1.82fc, Min. attenuation : 60dB(typ.) , High frequency attenuation (10fc to 1MHz): Min.55dBInput characteristicsInput impedance : Min. 50kΩ, Max. input voltage (linear) : ±10VOutput characteristicsOutput impedance : Max. 100Ω, Max. output voltage : ±10V, Voltage noise (input short) : Max. 140µVrms(typ.) input short (10Hz to 500kHz bandwidth), Offset voltage : ±10mV(typ.), adjustableOthersSupply voltage : ±15V (±14 to ±16V), Quiescent current : ±28mA(typ.), Dimensions : 54.4(W) x 33.7(D) x 9.4(H) mm, type HA packageThis device is compatible with Datel Product model FLJ-D5LA2Based on this product, NF will respond flexibly customers requirement

Features & Highlights

  • Low pass filters with steep attenuation characteristics, which are intended for anti-aliasing at A/D conversion
  • Cut-off frequency : to be shifted at 8 positions with digital signal
  • Suitable for frequent shift in sampling frequency
  • Cut-off frequency range : 100, 200, 500, 1k, 2k, 5k, 10k, 20kHz
  • Filter characteristics : 5-pole Elliptic LPF 60dB/oct equivalent

Additional Information

Brand:
NF
Manufacturer:
NF Corporation
Category:
Radio Frequency Filters
MPN:
DT-5FL2
Part Number:
DT-5FL2
Publisher:
NF Corporation
Item Size:
2.14 x 0.37 x 1.33 inches

 


Have questions about this item (DT-5FL2), or would like to inquire about a custom or bulk order?


If you have any questions about this product by NF, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


mpn: SV-4BL1,
SV series are resistor-tunable low-pass filters in 15-pin single-inline package(sip).It's powered by 5V or 3.3V of single supply voltage.An easy setting of cutoff frequency is assured with the external resistors.4 model is available. SpecificationsAb...

mpn: SV-4FL1,
SV series are resistor-tunable low-pass filters in 15-pin single-inline package(sip).It's powered by 5V or 3.3V of single supply voltage.An easy setting of cutoff frequency is assured with the external resistors.4 model is available. SpecificationsAb...

mpn: SV-4BL2,
SV series are resistor-tunable low-pass filters in 15-pin single-inline package(sip).It's powered by 5V or 3.3V of single supply voltage.An easy setting of cutoff frequency is assured with the external resistors.4 model is available. SpecificationsAb...

mpn: 10.7-15B,
ECS Inc. ECS-10.7-15B 10.7 MHz Monolithic Crystal Filters Quantity: 20     (Lot of 10 matched pairs) GoldenO Part# 2890 Details at a glance: Inventory Class New Old Stock Manufacturer ECS Inc. International Mfg. Part # ECS-10.7-15B Specifications...