Adafruit PN532 NFC/RFID controller breakout board
Free Shipping Included! Adafruit PN532 NFC/RFID controller breakout board by Adafruit at Band Electric. MPN: 364. Hurry! Limited time offer. Offer valid only while supplies last. The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. If you want to do any sort of embedded NFC work, this is the chip you'll want to use! NFC (Near Field Communications) is a way for two devices very close to each other to communicate. Sort of like a very short range bluetooth that d
Product Description & Reviews
The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. If you want to do any sort of embedded NFC work, this is the chip you'll want to use! NFC (Near Field Communications) is a way for two devices very close to each other to communicate. Sort of like a very short range bluetooth that doesn't require authentication. It is an extension of RFID, so anything you can do with RFID you can do with NFC. You can do more stuff with NFC as well, such as communicate bi-directionally with cell phones Because it can read and write tags, you can always just use this for RFID-tag projects. We carry a few different tags that work great with this chip. It can also work with any other NFC/RFID Type 1 thru 4 tag (and of course all the other NXP MiFare type tags) The PN532 is also very flexible, you can use 3.3V TTL UART at any baud rate, I2C or SPI to communicate with it. This chip is also strongly supported by libnfc, simply plug in an FTDI cable and use the FTDI serial port device to communicate - this lets you do NFC dev using any Linux/Mac/Windows computer! Comes with: the PN532 breakout board including a tuned 13.56MHz stripline antenna, 0.1" header, 2 jumpers/shunts and a 4050 level shifter chip. We also toss in a Mifare Classic 1K card! (You can get more tags from us here) New in version 1.3: onboard power LED, 3.3V regulator and an FTDI header so you can plug in an FTDI friend or FTDI cable and use with libnfc.
Features & Highlights
- Requires some solderings
- Easy to build, perfect for your Arduino project
- Breakout board version, shield version also available!
- Genuine Adafruit product- don't buy a knockoff!
4 x 0.5 x 6 inches
Have questions about this item (364), or would like to inquire about a custom or bulk order?
If you have any questions about this product by Adafruit, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: SEN-12909, ean: 0799430212304,
This is the MS5803-14BA Pressure Sensor Breakout, a high resolution pressure sensor with both an I2C and SPI interface. This MEMS pressure sensor measures the absolute pressure of the fluid around it which includes air, water, and anything else that ...
sku: SEN-11028, mpn: 43237-2, ean: 0799430211659,
The MPU-6050 is a serious little piece of motion processing tech! By combining a MEMS 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion ProcessorTM (DMPTM) capable of processing complex 9-axis...
mpn: TW1110, ean: 0713012544416,
Model: StarF4S Lipo Battery: 2-4S Con. Current: 30A Peak Current: 35A (10S) LBEC: 5V @3A Programming: YES F4 FC + OSD + BEC + Current Sensor Input Voltage: 2-4S Lipo Output Voltage: 5V@1A Sensor: STM32F4 CPU ICM-MPU6000 Accelerometers and Gyroscope...
mpn: QS10, ean: 6941344402416,
Quimat Two-wheel Arduino Project Smart Robot Car Kit brings you more fun Features: -- An Android APP is provided to connect with the car robot via Bluetooth , easy to control robot. -- Equip with ultrasonic sensor, tracking module and IR sensor, whic...